Personal Safety; Special Safety Instructions - Kamikaze KV380 Manual Del Usuario

3.3 Power Tool Use Safety
• Do notoverload the tool, select suitable tool to work make you safe and high efficiency.
• Do not use the tool if the switch doesn't work properly. Tool should be repaired if the switch doesn't work.
• Disconnect the battery from the tool before adjusting, repair, replace or storage the tool. This will
avoid injuries due to unexpected start of the tool.
• Store the tool away from the children, do not put tool to non-training person operate.
• Maintain tools. Always check tool, moving parts, any damage parts are all can cause injury, the
correct maintenance of the tool can avoid injury.
• Keep blade sharp and clean. Sharp and clean blade can be easily controlled and not jams.
• Read manual before using the tool, select suitable tools and right accessories to avoid injury.
3.4 Battery-Operated Tool Precautions
• Use only the charger specified by the manufacturer. Use of other charger can damage the battery
and cause risk of fire.
• The tool is only designed for original battery. Using other battery to match the tool can cause
damage and risk of injuries.
• Battery should be stored away from metal parts, like clip, coin, key, nail, screw or other small
metal parts. Short circuit the battery will cause fire.
• Inappropriate usage will cause leakage of liquid. If your body is splashed by the liquid, please flush
by clean water. Must see a doctor if liquid touches eyes. Liquid of battery will canker or burn.
3.5

Personal safety

• Be awake, alert and pay close attention during the operation of power tools. Do not operate the
power tool when you are tired, intoxicated or on medication. Falling asleep or losing
consciousness during in the operation of the power tool can result in serious personal injury.
• Use personal protective equipment. Always wear goggles and safety equipment such as dust
masks, non-slip safety shoes, hard hats, hearing protection, etc. Wearing safety gear in
appropriate conditions can reduce personal injury.
• Inserting the plug when the tool is plugged in or when it is turned on can be dangerous.
• Remove all adjustment keys or wrenches before the power tool is on. A wrench or key left on the
moving parts of the power tool can cause personal injury.
• Do not overextend your reach and lose balance. Always pay attention to your foothold and body
balance. This allows for good control of the power tool especially during unexpected situations.
• Dress properly. Do not wear loose clothing or jewelry. Keep clothing, gloves and hair away from
moving parts. Wearing loose clothes, accessories, or long hair may get caught in moving parts.

4 Special Safety Instructions

4.1 Pruning shear special safety instruction
• Keep anybody away at least 1.5m from the blade, do not move cutting parts at blade working.
74