Publicidad
Idiomas disponibles
Idiomas disponibles
to the blender. A rubber scraper may be used, but must be used
only when the blender is not running.
16. Blades are SHARP. Handle carefully.
17. Never place cutting assembly or cutting blades on base without
container properly attached.
18. Always operate blender with cover in place.
19. CAUTION: This blender is not intended for use with hot liquids
or ingredients.
20. Do not fill above MAX FILL line for blending.
21. Not for waterjet cleaning.
22. Ensure the jar coupler and motor coupler are aligned and
engaged before operating. If unable to engage, remove jar and
shake contents, then try again.
23. The jar coupler and motor coupler may be hot after running;
do not touch.
24. Always use HIGH speed for crushing ice.
25. If the jar overflows during blending, there is too much
liquid/ingredients in the jar. Stop blending, remove enough
liquid/ingredients to below MAX FILL line, and continue
blending. Do not operate if overflowing.
26. DO NOT use carbonated liquids in the blender jar or any
blending container. Using carbonated liquids in the blender jar
or any blending container may result in injury.
27. DO NOT blend oil or oil-based products such as peanut butter
for greater than 5 minutes.
28. Never remove blender jar from base unit until the blade and
coupling have completely stopped.
29. In order to avoid a hazard due to inadvertent resetting of the
thermal cut-out, this appliance must not be supplied through
an external switching device, such as a timer, or connected to a
circuit that is regularly switched on and off by the utility.
30. Be careful if hot liquid is poured into the blender as it can be
ejected out of the appliance due to sudden steaming.
31. The appliance is intended to be used in household and similar
applications such as:
– staff kitchen areas in shops, offices and other working
environments
– farm houses
– by clients in hotels, motels and other residential type
environments
– bed and breakfast type environments
3
Publicidad
