Cleaning Instructions - NORTH STATES 8805 Manual De Instrucciones

Removal from Wall Hinge
To remove the gate from the wall hinge, press on
the locking boss located on the center of the wall
hinge (See Figure 8), and lift the panel itself until
the gate rib clears the locking boss.
Pet Door Operation
Your gate comes from the factory with the
pet door in the locked position. See Figure 9.
To Unlock
Squeeze and twist the front center knob
located below the pet door. As you twist, the
knob will line up with the arrows on the right
or left sides of the knob. The pet door will
move freely in both directions for your pet to
pass through. See Figure 9.
To Lock
Squeeze and twist the front center knob
located below the pet door. As you twist, the
knob will be in the upright position, keeping
the door securely locked. See Figure 9.
Folding for Transport or Storage
Your gate folds compactly for transport or
storage. You must, however, fold the panels
properly. Gently fold the panels (without
jerking them or slamming them together) in
alternating directions like an accordion. Figure
10 illustrates the con guration of a properly
folded gate.

Cleaning Instructions

Your gate is manufactured from durable,
weather-resistant plastic panels. To clean, wash
the panels with mild, non-abrasive detergent,
rinse with clean water, and allow to dry
thoroughly.
FIGURE 8
FIGURE 9
Locked Position
Squeeze and Twist to Open
FIGURE 10
Page 4
Open Position
(Front View)
Locked Position
(Back View)