PEDROLLO E1 MONO Instrucciones Originales De Uso página 61

MODE5 CONFIG
COSFI REC:ON
MODE5 CONFIG
REC TIME:2m
MODE5 CONFIG
MAX REC T:60m
Configuring MODE 6
SELECT
MODE CONFIG
9
MODE CONFIG
MODE:1
6 9
9
MODE CONFIG
SETUP
9
MODE6 CONFIG
RUN:EMPTYING
MODE6 CONFIG
SENS L:OFF
MODE6 CONFIG
• Enable (ON) or disable (OFF) automatic COSFI recovery when it is below
COSFI MIN (dry running)
• With COSFI RECOVERY, the control panel attempts to automatically recover
an electric pump that is in the dry running alarm state (COSFI read < COSFI
minimum)
• Recovery time for automatic deactivation of the dry running alarm.
• The control panel attempts automatic recovery after the set time, and then
doubles it on each subsequent cycle (e.g. 2 min, 4 min, 8 min ...), up to the
maximum recovery time (see the next parameter).
• Maximum recovery time for automatic deactivation of the dry running
alarm.
• The control panel attempts automatic recovery up to the set maximum val-
ue (e.g. every 60 min).
• Press the
• Press the
• Press the
MODE:6
(from modes 1 to 6)
• Press the
• Press the
• Press the
• Set the operating mode:
– EMPTYING (empty the collection tank)
– FILLING (fill the tank)
– PRESSUR. (pressurise the domestic/industrial system)
• Enable (ON) or disable (OFF) the capacitive level sensors
• Set the first input (IN1):
IN1:RUN
– STOP (input enabled to stop the first pump)
– RUN (input enabled to start the first pump)
– OFF (input disabled)
Default 2 min Range 0-10 min
Default 60 min Range 0-120 min
key to confirm the choice and enter the submenu.
key to enter the submenu and change mode.
or key to select mode 6
key to confirm the choice of MODE:6
key to continue with the configuration
key to enter the mode 6 configuration submenu
Step 1 min
Step 1 min
Continued
ENGLISH |
61