Publicidad
Idiomas disponibles
Idiomas disponibles
plugging.
WARNING:
Important:
If the suction openings of the unit, the hose or the chrome telescopic tube are blocked, switch off
the vacuum clearer and remove the blocking substance before you start the unit again.
1. Do not operate the vacuum cleaner too close to hearter or radiators.
2. Before inserting the power plug into the wall outlet, make sure that your hands are dry.
3. Before you start the unit, make sure to remove large or sharp objects that might damage the
dust tank and hose.
4. When pulling out the power plug from the wall outlet, pull the plug not the power cord.
5. Do not use without all filters in place.
6. When using, if you learn of squeak from the cleaner, it must be suction appears to be reduced,
so you must stop (make sure the cleaner is not plugging), then clean the all air filter.
Note:
If the supply cord is damaged, it must be replaced by manufacture, its service agent or similarly
qualified person in order to avoid a hazard.
WARNING:
Hold the plug when rewinding the cord. Do not allow the cord to whip when rewinding.
Use and function
Assembling vacuum cleaner
Note:
Always remove the power plug from the wall outlet before assembling or removing accessories.
1. Attaching the Flexible Hose into the vacuum connect the flexible hose into the air intake duct,
push in until you hear a "click", indicating it is in its locked position.
2. Fitting the Stainless steel telescopic tube to the curved wand/hose extension. Push the
stainless steel telescopic tube into the curved wand/hose extension.
3. Extending the stainless steel telescopic tube. Push forward on the plastic button and pull the
inner stainless steel telescopic tube outward.
4. Fitting the Floor Brush to the telescopic tube. Push the telescopic tube into the floor brush.
Adjust the tube to the desired length.
9
Publicidad
