Hitachi RCMA18AN Manual De Instalación Y Funcionamiento página 4

Don't touch the screen with sharp points or
edges which may damage the controller.
Don't twist or pull the wires of the controller.
Don't wipe the controller with benzene, diluent
or chemical cloth. Otherwise discoloration or
mechanical failure may occur. To remove dirt, dip the
cloth in the water with a neutral detergent and wring
the water before cleaning. Wipe dry the controller with
dry cloth. Do not exert excessive force on the display or
connection in order to avoid changes in hue.
INTERFACE
1
3
4
7
Area 1: Date and time display;
Area 2: Timer display;
Area 3: Temperature display (include the set point and actual controlled water temperature);
Area 4: Serial number display;
Area 5: Operating mode setting;
Area 6: Running status display;
Area 7: Touch-keys.
The meanings of the icons are listed below.
PMML0297 rev.0 – 08/2018
4
OPERATION
INTRODUCTION
The touch screen wired controller is for remote control
of RCMA/RHMA units. The wired controller utilizes
graphic icons in the user interface, for parameter
setting, viewing operating status and fault messaging..
2 1
5
6
EN