Intended Use For The Tile Cutter; Safety Instructions; General Safety Rules - Dexter 450ETC1 Manual De Instrucciones

1. INTENDED USE FOR THE TILE CUTTER

the professsional version of use.
consulting with the manufacturer.
No metal work pieces may be machined.
The proper use also includes compliance with the operating and maintenance instructions given in this
manual.
The machine must be operated only by persons familiar with its operation, maintenance and repair and
who are familiar with its hazards.
The required minimum age must be observed.
The machine must only be used in a technically perfect condition when working on the machine, all
safety mechanisms and covers must be mounted.
In addition to the safety requirements contained in this operating instructions and your country's
applicable regulations, you should observe the generally recognized technical rules concerning the
operation of machines.
Any other use exceeds authorization. In the event of unauthorized use of the machine, the
manufacturer renounces all liability and the responsibility is transferred exclusively to the operator.

2. SAFETY INSTRUCTIONS

2.1 GENERAL SAFETY RULES

WARNING ! Read all safety warnings, instructions,
Failure to follow all instructions listed below may result in electric
Keep all safety instructions and information for future reference!
The term "power tool" in the warnings refers to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
1. Work area safety
a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.
liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while operating a power tool. Distractions can cause you to
lose control.
2. Electrical safety
a) Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power tools.
reduce risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the
risk of electric shock.
d) Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords
increase the risk of electric shock.
110
FR
ES
PT
IT
EL
PL
UA
RO
EN