Publicidad
Idiomas disponibles
Idiomas disponibles
5
Operation
5.1 Startup
These operating instructions must be brought to the attention of all persons entrusted with the operation of the
machine, with particular emphasis on the chapter "Safety instructions".
5.2 Switching on
Use the following procedure to switch on the
machine:
1.
Press the switch-on lock (4) forward to unlock.
2.
With the switch-on lock depressed, actuate
and hold the operating lever (6).
3.
Release the switch-on lock (4).
The machine is switched on
✓
Since the switch is not latching, the machine runs only as long as the operating lever is
pressed.
5.3 Rotational speed setting
Use the following procedure to select the
rotational speed:
1.
Select the desired level at the setting wheel
(7).
At the setting wheel (7), you can adjust
➢
the saw blade speed continuously
between 3600 and 6200 rpm.
The rotational speed is set.
✓
18
Fig. 12: Switching the machine on
Fig. 13: Selecting the rotational speed at the setting wheel
MT55cc
01/2022
Publicidad
