Publicidad
Idiomas disponibles
Idiomas disponibles
When the minute is up, the electronic
device will work out the difference and
your fi tness rating will be displayed up
on the screen: "F1, F2,..., F5, F16;
where
F1
is
"Excellent") and F6 the worst (fitness
"Very Poor").
Pressing the "PULSE/RECOVERY"
button will take you back to the main
screen, where the functions will be in
the same mode as when the TEST
began.
The comparison between the worked
heart rate and the recovery heart rate
provides a fast, simple method of
gauging how fit you are. Your fitness
rating is a guideline that shows you
how fast your heart recovers after
physical exertion. If you exercise
regularly then you will see your fitness
rating improve.
The test will not work if the sensor is
not connected correctly or if the error
code "E1" appears on the screen.
The TEST will not work if you do not
have both hands placed on the hand-
grip sensors (R) Fig.2 after you have
stopped doing the exercise.
If the error code "E1" is shown on the
screen then this means that you do
not
have
your
correctly on the hand-grip sensors (R).
If the error code "E2" appears on the
the
best
(fitness
hands
positioned
screen, this means that you have not
stopped exercising.
TROUBLESHOOTING GUIDE
Problem: The display comes on but
only the Time function Works.
Solution:
a.-Make sure that the connection
cable is connected.
(9V Transformer)
Problem: The monitor does not switch
on.
Solution:
a.-Check
the
connection
b.-Check the output connection from
the transformer to the monitor.
c.-Check
connections.
d.-Check the cable connections for the
main post.
Avoid leaving the electronic monitor in
direct sunlight as this might damage
the liquid crystal display. Similarly, do
not expose it to water or knocks.
BH RESERVES THE RIGHT TO
MODIFY THE SPECIFICATIONS OF
ITS PRODUCTS WITHOUT PRIOR
NOTICE
13
AC220
V
the
monitor
mains
cable
Publicidad
