Descargar Imprimir esta página

Mayer Barbecue EDS-100 Instrucciones De Montaje página 10

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

EN
A
B
C
D
E
The door handle is removable, in order to let you take it out and
clean the inside of unit. Before you use the grill, please assembly
the handle yourself by the following assembly instruction picture.
Clean the grill and the pan thoroughly with a slightly damp cloth
and a mild detergent before using for the first time. Then dry with
a soft cloth.
Before you connect the appliance to the power supply system,
check whether the supply voltage complies with the information
on the type plate.
When you are ready to use the grill, be sure that the TIMER Cont-
rol is in the "Off" position and unplugged.
We recommend a trial run to familiarize yourself with your grill
and to eliminate any productions remainings or protective oil.
Insert the power plug in an earthed socket (220-240 V). IMPORT-
ANT: do not clamp power cables. Do not let cables hang down and
be careful that they do not become a trip hazard.
Select heating level „HI" by the pressing the switch on the base
and set the TIMER Control to "10" minutes.
A small amount of smoke and odor may be detected. This is normal.
This Mayer Barbecue electric grill is not intended for the industrial use.
10
www.mayergrill.com
START-UP
A - Glass door
F
B - Skewer
G
C - Door handle
H
D - Timer
E - Heating speed switch ( LOW - OFF - HIGH)
F - Upper support (kebab)
G - Heating element
I
H - Rotisserie spit
J
I - Bottom support (kebab)
J - Drip pan
K - Indication light
K

Publicidad

loading

Este manual también es adecuado para:

1000020158