Anti-Tip Bracket Installation - Midea MES30S2AST Instrucciones De Instalación

Anti-Tip Bracket Installation:

WARNING
TIP OVER HAZARD
• A child or adult can tip the range and be killed.
Verify the anti-tip device has been properly
installed and engaged per installation instructions.
Ensure the anti-tip device is re-engaged when the
range is moved.
• Do not operate the range without the anti-tip
device in place and engaged. Failure to do so can
result in death or serious burns to children or adults.
Do not remove the leveling legs. Doing so will
prevent the range from being secured by the
anti-tip device.
To reduce the risk of tipping of the range, the range must be secured to
the floor by the properly installed anti-tip bracket and screws packed
with the range. Failure to install the anti-tip bracket will allow the range
to tip over if excessive weight is placed on an open door or if child
climbs upon it. Serious injury might result from spilled hot liquids or
from the range itself.
The anti-tip kit is provided with the range. If the anti-tip bracket is
missing, damaged, or needs replaced, a replacement kit will be provided
free-of-charge by contacting Midea customer service at 1-866-646-4332
or by visiting midea.com/us/support.
If range is ever moved to a different location, the anti-tip brackets must
also be moved and installed with the range. If range is removed from
service, secure door closed or remove door to minimize tip over risk.
(See "Door Removal and Reinstallation" section in this manual or
under "Cleaning and Maintenance" in the User's Manual for instructions
on how to remove door.)
Directions:
• Using the template provided with anti-tip
kit, locate the preferred location for
installation of the anti-tip bracket and mark
the location of the screw holes. Bracket
may be installed at either the back-left or
back-right corner of the installation space.
Only one anti-tip bracket needs installed.
Anti-Tip Bracket
Leveling Leg
19