Publicidad
Idiomas disponibles
Idiomas disponibles
20. CAUTION – Some parts of this product can become very hot and cause burns.
Particular attention must be given when children and vulnerable people are
present.
21. This product is fitted with a thermostatic room temperature control.
Location of Controls
1.Thermostat control knob (TEMPERATURE SETTING)- Adjust to maintain room temperature.
2.Flame switch - Switches flame effect and power on/off.
3.Heating setting: please press "
4.Heating setting : please press "
first press"
".
5.Flame dimmer control - Adjust to set flame intensity.
Lay stove upside down on a padded surface to avoid scratches to the surface of your stove.
Line up holes in the leg with holes in the underside of the stove body. With the use of the
screwdriver secure leg with the screws provided (3 screws per leg) as shown in the figure below.
Overheating safety device
If the heater stops working, turn it off and check if the inlet or outlet is blocked. Unplug the unit and
wait at least 10 minutes, so the protection system can reset. If the heater still does not work,
contact customer service for inspection or repair.
Before restarting the heater, ensure it has been unplugged for at least 10 minutes.
" for 1000W.
"and "
" at the same time for 2000w(can not operate without
3
WARNING: Do not use this heater with
missing, damaged, or broken legs.
Publicidad
