Descargar Imprimir esta página

Silvercrest SSRA1 Guía Rápida página 23

Robot aspirador
Ocultar thumbs Ver también para SSRA1:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 85
or pull the product or the charg-
ing dock
. Do not allow the
2
product to run over the mains
lead
and keep it away from
4
heat sources.
If the mains lead
it must be replaced by a quali-
fied service technician to avoid
dangers.
Do not use the product if dam-
aged due to
- falls,
- damage,
- ingress water,
- outdoor use
and not working properly. Have
the product repaired by the man-
ufacturer or its customer service
department.
Do not use the product in rooms
with children.
Do not use the product on wet
or damp floors.
Do not use the product near
open fire.
Do not use the product in tem-
peratures over +40 °C or below
+10 °C.
Remove obstacles before use,
for example power cords, toys
and other objects.
Tuck rug edges under the rug.
Do not allow curtains and table-
cloths to touch the floor.
is damaged
4
Try to position furniture properly.
Test the product in areas with
stairs. This allows you to verify
the product detects the edge of
the drop off.
Do not stand in the way of the
robot vacuum cleaner. Otherwise
the robot vacuum cleaner will be
unable to clean these.
Keep hair, clothing and fingers
away from the openings and
operating parts of the product.
Do not allow the product to
vacuum up items which could
clog the product, for example
stones, paper waste, etc.
Do not allow the product to vac-
uum up flammable materials, for
example fuel or toner from print-
ers or photocopier.
Do not allow the product to
vacuum up burning items, for
example cigarettes, matches,
ashes and other objects which
could cause a fire.
Do not use the product if the suc-
tion opening is blocked. Remove
dust, hair, cotton wool, etc., to
allow air to flow freely in the
suction opening.
Verify the dust collector
the filters
,
,
6
25
installed before use.
and
17
are properly
26
GB/IE
23

Publicidad

loading