Kingston Technology IronKey Vault Privacy 50 Manual De Instrucciones página 15

Device Initialization
Admin and User Passwords
•
If Admin Role was enabled in the
previous screen, the following screen
will prompt for the User Password
(Figure 4.13) The User Password will
have limited capabilities compared to
Admin and will be discussed in further
detail later in this User Guide. (see Page
23)
Note: The chosen Password Option (Complex or Passphrase) criteria will carry over to the User Password, One-Time
Password Recovery and to any password resets that are needed after the drive is set up. The chosen password
option may only be changed after a full device reset.
•
•
The 'Require password reset on next
login' feature on the bottom left corner
of Figure 4.13 is only for the User
Password and can be enabled to force
the User to login using the temporary
password set by Admin during the
initialization process, and then change it
to a password of their choice after the
drive is authenticated with the
temporary password. This is useful when
the drive is given to another person to
use. (
Figure 4.14)
Note: For security, the new password
cannot be the same as the temporary
password.
Figure 4.13 - User Password (Admin and User Enabled)
Figure 4.14 - Require password reset on next login
(For User Password)
14