User Settings: Admin Not Enabled; Changing And Saving Vp50 Settings - Kingston Technology IronKey Vault Privacy 50 Manual De Instrucciones

VP50 Settings

User Settings: Admin Not Enabled

As mentioned previously on Page 12, initializing the VP50 without enabling 'Admin and User' passwords will
configure the drive up in a Single Password, Single User setup. This configuration does not have access to any
Admin options or features. This configuration will have access to the following VP50 Settings:
Changing and Saving settings
•
Whenever settings are changed in
the VP50 Settings (e.g.) Contact
information, language, Password
changes, Admin options etc..), the
drive will prompt to enter your
password in order to accept and
apply the changes. (see Figure 7.11)
Note: If you are at the Password prompt screen above and would like to cancel or modify your changes, you can do
so by simply making sure the password field is blank and Click 'OK'. This will close the 'Please enter your password'
box and revert back to the VP50 settings menu.
Figure 7.11 - Password Prompt screen to save VP50 setting changes
23