FEIYUTECH SCORP Mini Guia De Inicio Rapido página 5

2.2 Adjust the gimbal to gimbal balancing position
The gimbal is folded by default, please unlock all the three axes and adjust the gimbal to
gimbal balancing position, and then lock the three axes.
3
2
1
Gimbal folded position
3. Mounting the Camera/Smartphone
Take camera mounting as an example.
Before mounting the camera, make sure the camera is ready for shooting (Install the camera
lens, and the lens cover should be removed, the memory card and battery needs to be
inserted to the camera, and battery is fully charged) , complete all the steps which mentioned
in chapter "2. Getting started" and the gimbal is adjusted to
Make sure the gimbal is powered off or in sleep mode before mounting the camera.
3.1 Attach the quick release plate
Attach the quick release plate to camera by tightening
the screw.
If the camera doesn't have the 1/4-20 inch screw hole,
please put the camera on mount adapter, which has
1/4-20 inch screw hole, and then mount it in above
steps.
Users can mount smartphone into the optional
smartphone holder, and follow the steps above to
install it on the gimbal.
Gimbal balancing position
gimbal balancing position.
EN
3.2 Install lens holder (Optional)
Install the lens holder on the quick release plate if needed, the rubber of the lens holder must
be directly under the lens. It is recommended to use the lens holder when using a long or
heavy lens.
3.3 Mount camera on gimbal
Unlock the quick release plate safety lock
the slot ② in direction of icon, lock the safety lock
is recommended to push the camera against the tilt axis. Unlock the slider lock
the camera left or right according to camera's width, then lock the slider lock
2
!
3
- 5 -
① , install the plate with the mounted camera into
① once the camera is roughly balanced. It
③ to move
③ .
1
3