Descargar Imprimir esta página

HammerSmith M32719 Instrucciones De Uso página 10

Ocultar thumbs Ver también para M32719:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 45
sure that you can maintain a strong and balanced
stance. This assures better control in unexpected
situations.
• Do not over-estimate your capacities. Make sure
you have a secure stance and balance at all times.
This allows for better control over the device in
unforeseen situations.
• Wear appropriate clothing. Do not wear loose
clothing or jewellery. Make sure that hair, clothing
and gloves cannot become caught in the moving
parts.
• Never attempt to remove the cut material or hold
the material to be cut while the blades are moving.
• With the blade stopped, carry the trimmer/shears
by the handle, being careful not to trigger any
power switches.
• Just one moment of carelessness during operation
could result in serious injury.
• Always attach the blade cover when transporting
or storing.
• When removing jammed material or performing
maintenance on the appliance, make sure all
switches are off and that the power cord is
unplugged.
• Do not use the hedge trimmer/grass shears in
bad weather, especially when there is a risk of
lightning.
• Please check hedges and shrubs beforehand
for foreign objects, e.g. wire fences and hidden
cables.
• Only use the hedge trimmer while close to the
ground; never use while on ladders or other
unstable supports.
• Wear hearing protection. Appropriate protective
equipment reduces the risk of hearing loss.
4. USE AND CARE OF THE DEVICE
• Use the correct device configuration for the
M32719_HammersmithMultitool_Hecken-und-Grasscheren-Aufsatzset_Manual_A5_20220629_MM.indd 10
M32719_HammersmithMultitool_Hecken-und-Grasscheren-Aufsatzset_Manual_A5_20220629_MM.indd 10
respective application. A properly configured
device will allow better execution of the task and
is safer for the intended purpose.
• Do not use the device if the on/off switch is not
working correctly. Any device that cannot be
switched on and off with the switch is dangerous
and must be repaired immediately by a specialist
dealer.
• Remove the battery pack from the device before
altering settings, replacing accessories or storing
tools. These safety measures help to avoid the risk
of the device switching itself on unintentionally.
• The device may only be used by children who
are 8 years of age or older and by people with
limited physical, sensory or mental capabilities
or a lack of experience and knowledge if they
are supervised or have received appropriate
instruction on how to use the device, to operate
the device safely and in accordance with
regulations, and have been adequately informed of
all dangers that may arise from its use.
• Cleaning and user care must not be carried out by
children unless they are older than 8 years of age
and are supervised.
• Maintenance of the device. Make sure that
moving parts are correctly attached, firmly in
place, and free from damage that could impair
the functionality of the device. If the device
is damaged, you must have it repaired by an
authorized dealer.
• Keep the cutting tools clean and fresh. Properly
maintained cutting tools with sharp blades are
less likely to become clogged and are easier to
control.
• Use the device and accessories in accordance
with these instructions, taking into account the
working conditions and the task to be performed.
Using the device for work for which it is not
10
20.07.22 12:12
20.07.22 12:12

Publicidad

loading