Additional Safety Rules - HammerSmith M32719 Instrucciones De Uso

intended can lead to dangerous situations.
• Only ever charge the battery using the charger
provided by the manufacturer.
• A charger designed for a different battery pack can
create a fire hazard if it is used for charging.
• When the battery pack is not in use, keep it
away from other metal objects as these could
potentially short-circuit the poles of the battery.
If the poles of the battery are connected to one
another, a fire or fire may result.
• In the event of improper working and storage
conditions, liquid can escape from the battery.
Avoid this coming into contact with the skin under
all circumstances. If you accidentally come into
contact with the liquid, rinse it off immediately
with water. If the liquid comes into contact with the
eyes, seek medical attention immediately. Liquids
that leak from batteries can cause skin irritation
and burns.
• This device is designed for household and
personal use only.
5. MAINTENANCE
• Do not try to repair the device yourself, and
ensure that repairs are only ever carried out by an
authorized specialist dealer.
• Use only original replacement parts. This
guarantees that the safety of the device is
maintained.
The operation and use are entirely the responsibility
of the user.

ADDITIONAL SAFETY RULES

• Always use protective goggles or glasses.
• Never use the Hammersmith MultiTool if it is wet.
• Wear hearing protection during prolonged use.
• Wear a dust mask when operating in a dusty
environment.
M32719_HammersmithMultitool_Hecken-und-Grasscheren-Aufsatzset_Manual_A5_20220629_MM.indd 11 M32719_HammersmithMultitool_Hecken-und-Grasscheren-Aufsatzset_Manual_A5_20220629_MM.indd 11
• Before sanding, make sure that any nails, screws
or other metal objects protruding from the
workpiece have been removed.
• Always inspect walls and ceilings before drilling
and screwing to avoid damage to potentially
concealed power cables and pipes.
• Use screw clamps or other suitable clamping
devices to fix the workpiece firmly to the surface
and to prevent it from slipping.
• Only use attachments that are supplied for the
Hammersmith MultiTool.
• Do not use broken, damaged or worn accessories
or attachments. Only use attachments that are in
good working condition.
• Always start the device in a suitable space,
and allow it to reach the optimum speed before
introducing it to the workpiece.
• Always remove the battery pack from the device
before changing attachments.
• Keep your hands out of the work area, and always
cut away from yourself and other people.
DANGER: ALWAYS KEEP HANDS AWAY
FROM THE BLADE. Accidentally touching
the blade can lead to serious injury.
WARNING: To avoid the risk of injury,
remove the battery pack from the tool
before making any adjustments, removing
an attachment or installing a new accessory.
INSERTION AND REMOVAL OF THE TRIMMER
ATTACHMENT (see figure 1/A+B)
Adjusting the trimmer/shearing head
1. Make sure the direction switch is in the forward
position.
2. Insert the attachment into the main unit.
Attaching the attachment
(rear trimmer and grass shears)
To attach the hedge trimmer/grass shear, slide the
rear edge into the head and press against it (it will
click into place).
11
20.07.22 12:12 20.07.22 12:12