Specification - Cole-Parmer HBC-100 Serie Manual De Instrucciones

SPECIFICATION

HCB-100-140F Specification
The figures stated in the specification are as measured 0-50 mm from the base of the well of the insert,
using an SPRT, at the time of calibration.
Minimum temperature
Maximum temperature
Temperature accuracy
Temperature uniformity
Temperature stability after 10 minutes
Display resolution
Set point display resolution
Heat up rate 5 minutes
Cool down rate 9 minutes
Fan cooling Automatic
Dimensions Height x Width x Depth
Large well in the block:
Weight
Options
Central Well for inserts, see the list of inserts
Full bi-directional RS232 Comms Port 9way
D type plus software and cable
Soft carry case
Hard carry case
UKAS calibration certificate
*Although temperature can be set to -40°C this can only be achieved in an ambient of 5°C.
*45°C below ambient
Typically -20°C in an ambient of 25°C
140°C
±0.3°C
±0.2°C
±0.05°C
0.01°C
0.1°C
20°C to 100°C
100°C to 0°C
Automatic
273mm x 207mm x 289mm
Depth / Diameter 130mm / 38.2mm
11Kg
14