Publicidad
Idiomas disponibles
Idiomas disponibles
16) Lifting Bracket - Lift log.
17) Gear Pump
Read and follow all instructions for assembly and operation. Failure to properly assemble this
equipment could result in serious injury to the user or bystanders, or cause equipment damage .
22 TON LOG SPLITTER ASSEMBLY
Set the shipping crate on a solid flat surface and carefully remove the lid. Use two people and take
all parts out of the shipping crate and inspect the components to ensure there are no missing pieces
before starting to assemble the log splitter follow steps 1 through 9.
TOOLS REQUIRED
Rubber or Wooden Hammer
13mm, 16mm, 17mm, 18mm, 19mm, 24mm, 27mm Wrenches
Large Adjustable Wrench
Phillips Screwdriver
Pliers
CAUTION
Engine Shipped Without Oil.
Before starting engine, fill with SAE 10W-30 motor oil.
See engine manual for engine oil capacity.
Hydraulic Reservoir is Shipped Without Oil.
When adding oil verify the oil level using the Oil filter/Dip Stick on the top
of hydraulic reservoir if marking is not shown fill to the L line.
Inspect all Log Splitter Components.
If you have damaged components: Contact the freight company that
delivered the log splitter and file a claim.
Publicidad
