Descargar Imprimir esta página

Declaration Of Conformity; Corrective Action - Bosch ART 23 SL Manual Original

Ocultar thumbs Ver también para ART 23 SL:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 17
All manuals and user guides at all-guides.com
OBJ_BUCH-2058-002.book Page 10 Tuesday, January 28, 2014 9:00 AM
10 | English

Declaration of Conformity

We declare under our sole responsibility that the product described under "Technical data"
is in conformity with the following standards or standardization documents: EN 60335 ac-
cording to the provisions of the directives 2011/65/EU, 2004/108/EC, 2006/42/EC,
2000/14/EC.
2000/14/EC: Guaranteed sound power level:
Conformity assessment procedure according to Annex VI.
Equipment category: 33
Notified body:
SRL, Sudbury, England, Nr. 1088
Technical file (2006/42/EC, 2000/14/EC) at:
Bosch Lawn and Garden Ltd., PT-LG/ENS23,
Stowmarket, Suffolk IP14 1EY, England
Henk Becker
Helmut Heinzelmann
Executive Vice President
Head of Product Certification
Engineering
PT/ETM9
Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
14.01.2014
Mounting and Operation
 Do not disassemble guard and metal tube once con-
nected.
 Do not connect the machine to the mains socket before
it is completely assembled.
 The cutting line continues to rotate for a few seconds
after the trimmer is switched off. Allow the motor/cut-
ting line to stop rotating before switching "on" again.
Troubleshooting
Problem
Trimmer fails to operate
Trimmer runs intermittently
Garden product labours
F 016 L81 069 | (28.1.14)
 Do not rapidly switch off and on.
 Remove any grass from spool cover when changing line
or spool.
 Only use Bosch approved cutting elements. Cutting
performance will vary with different cutting elements.
Check the guard screw is fixed tightly before using.
Check the tube joint is on correct position before using.
Machine will auto feed and cut the line when tool starts and
stops.
Action
Delivery Scope
Removing the rubber stop
Connecting the tube
Mounting the Cutting Guard
Connecting the Extension Lead
Switching On and Off
Removing the line spool
Mounting the line spool
Maintenance, Cleaning and Storage
Selecting Accessories
Possible Cause
Power turned off
Mains socket faulty
Extension cable damaged
Fuse faulty/blown
Extension cable damaged
Internal wiring of garden product dam-
aged
Grass too high
3 600 ...
HA5 0..
HA5 1..
dB(A)
96
96
Figure
1
2
3
4
5
6
7
8
9

Corrective Action

Turn power on
Use another socket
Inspect cable, replace if damaged
Replace fuse
Inspect cable, replace if damaged
Contact Service Agent
Contact Service Agent
Cut in stages
Bosch Power Tools

Publicidad

loading

Este manual también es adecuado para:

Art 26 sl