Descargar Imprimir esta página

Stroller Assembly - Joie signature parcel Manual De Instrucciones

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 13
WARNING
!
Always use the restraint system.
!
Ensure that all the locking devices are engaged before use.
!
Do not let the child play with this product.
!
Check that the pram body or car seat attachment devices
are correctly engaged before use.
!
Adult assembly required.
!
This product is suitable for children up to 22kg or 4 years
whichever comes first.
!
To prevent a hazardous, unstable condition, do not place
more than 4.5kg in the storage basket.
!
Never leave the child unattended.
!
Use the stroller with only one child at a time. Never place
purses, shopping bags, parcels or accessory items on the
handle or canopy.
!
Accessories which are not approved by the manufacturer
shall not be used.
!
Only replacement parts supplied or recommended by the
manufacturer shall be used.
!
To avoid injury ensure that the child is kept away when un-
folding and folding this product.
!
This product is not suitable for running or skating.
!
Pushchair designed to be used from birth shall recommend
the use of the most reclined position for new born babies.
!
The parking device shall be engaged when placing and
removing the children.
!
For car seats used in conjunction with a chassis, this vehicle
does not replace a cot or a bed. Should your child need to
sleep, then it should be placed in a suitable pram body, cot
or bed.
!
Carry cot shall not be used, as soon as the child is able to
sit by himself, roll over and can push itself up on its hands
and knees. Maximum weight of the child: 9kg.
!
No additional mattress shall be added unless recommended
by the manufacturer.
!
Any load attached to the handle and/or on the back of the
backrest and/or on the sides of the vehicle will affect the
stability of the vehicle.
13

Stroller Assembly

(Please refer to figures on page 1-9)
Please read all the instructions in this manual before assembling and using this product.
Open Stroller
see images
-
1
3
!
Check that the stroller is completely latched before continuing to use.
Assemble & Detach Front Wheel
see images
-
4
5
Assemble & Detach Rear Wheel
see images
-
6
8
Assemble & Detach Armbar
see images
-
9
11
Armbar can be opened one side for easy seating and unseating of child.
!
Always secure the child with the harness. The armbar is not a restraint device.
The completely assembled stroller is shown as
12
Stroller Operation
Use Buckle
see images
-
13
14
Release Buckle
Press the button, the buckle will release automatically.
Lock Buckle
Match the waist belt buckle with the shoulder buckle
can lock automatically.
- 2
A "click" sound means the buckle is locked completely.
14
!
Always secure the child with the harness. The armbar is not a restraint device.
!
Make sure your child is snugly secured. The space between the child and the shoulder harness is about the
thickness of one hand.
!
Do not cross the shoulder belts. This will cause pressure on a child's neck.
Use Shoulder & Waist Harnesses
see images
-
15
18
!
In order to protect your child from falling out, after your child is placed into the seat, check whether the
shoulder and waist harnesses are at proper height and length.
- 1
Shoulder harness anchor
15
- 2
Slide adjuster
15
For larger child, use shoulder harness anchor and the highest shoulder slots. For smaller child, use shoulder
harness anchor and the lowest shoulder slots.
To adjust the position of the shoulder harness anchor, turn the anchor to be level with the side facing forward.
Thread it through the shoulder harness slot from back to front.
Rethread it through the slot that is closest to child's shoulder height.
Use slide adjuster to change the harness length.
Press the button
18
-
2, while pulling the waist harness to proper length.
11
13
-
1, and align them with the center buckle, the buckle
14
- 3
14
16
17
- 1
18
18
- 3
14

Publicidad

loading