Buoyancy Chamber - Zodiac PRO 750 Manuel Du Propriétaire

BUOYANCY CHAMBER – Installing the buoyancy
II-1-INSTALLING THE BUOYANCY CHAMBER ON THE HULL
NOTE:
1
To facilitate the positioning of the buoyancy chamber, apply liquid soap (A) to the hull rails
2
Position the buoyancy chamber's rope (a) on the hull's rail (b) situated at the forward end of
the hull. Pull the buoyancy chamber to bring it to the min. position with the bolt rope opposite
the aft rail.
chamber on the hull
The buoyancy chamber is fitted to the hull with the buoyancy
You can inflate the buoyancy chamber when not installed
(pressure 240 mb) and leave to stabilize for about an hour. Then
deflate it.
If the buoyancy chamber has been stored at a temperature lower
than 0°C, leave it for 12 hours at room temperature (20°C) before
folding it.
chamber deflated.
10