Publicidad
Idiomas disponibles
Idiomas disponibles
BUOYANCY CHAMBER - PRESSURE
INFLATING THE BUOYANCY CHAMBER
• Place the adapter corresponding to the diameter of the semi built-in valve at the inflation
pump hose nozzle.
Inflate the buoyancy chamber, balancing the pressure between the different compartments
until the partitions (a) are no longer visible (pressure = 240 mb)
Never put a compartment
under pressure while the
others are still fully
deflated.
When you have finished inflating: Screw on the inflation valve plugs.
NOTE:
1
2
A slight loss of air is normal before the cap is screwed on.
Only the plugs provide final airtightness.
Page 13 / 28
a
E
N
G
L
I
S
H
-
Publicidad
