Starting Operation; Maintenance And Service; Maintenance And Cleaning - Bosch EasyLamp 12 Manual Original

14 | English
Inserting the Battery
Push the charged battery into the battery holder until it clicks into place.
Removing the Battery
To remove the rechargeable battery, press the battery release buttons and pull the bat-
tery out. Do not use force to do this.
Recommendations for Optimal Handling of the Battery
Protect the battery against moisture and water.
Only store the battery within a temperature range of −20 to 50 °C. Do not leave the bat-
tery in your car in the summer, for example.
A significantly reduced operating time after charging indicates that the battery has de-
teriorated and must be replaced.
Follow the instructions on correct disposal.
Operation

Starting Operation

Switching On and Off
To switch on the cordless worklight, press the on/off switch (2).
To switch off the cordless worklight, press the on/off switch (2) again.

Maintenance and Service

Maintenance and Cleaning

Remove the batteries from the worklight before carrying out any work on the
u
worklight (e.g. assembly, maintenance, etc.) as well as when transporting and
storing the worklight. There is risk of injury from unintentionally pressing the on/off
switch.
The cordless worklight is maintenance-free and does not contain any parts that need to
be replaced or maintained.
Only clean the cordless worklight's plastic lens with a dry, soft cloth to prevent damage.
Do not use any detergents or solvents.
The light source cannot be replaced. If the light source is defective, the entire cordless
worklight has to be replaced.
1 609 92A 8AN | (18.08.2022) Bosch Power Tools