EAS ELECTRIC EMCH R32 Serie Manual De Instrucciones página 105

PUMP_D RUNNING TIME is set 30 minutes (PUMP_D RUNNING
TIME can be set in "DHW MODE SETTING" in "FOR
SERVICEMAN").
The pump will run according to the figure below:
PUMP
ON
OFF
6:00 6:30 7:00 7:30 8:00 8:30 9:00 9:30
6.3 SCHEDULE
SCHEDULE contains the following menu:
1) TIMER
2) WEEKLY SCHEDULE
3) SCHEDULE CHECK
4) CANCEL TIMER
6.3.1 TIMER
The TIMER function is used to set different operation mode and
temperature in different time periods. If the TIMER is activated,
is displayed on home page.
If "WEEKLY SCHEDULE" and "TIMER" are both set, and "WEEKLY
SCHEDULE" is set later than "TIMER", then the "WEEKLY
SCHEDULE" setting is valid, the "TIMER" is invalid.
38
V.1