EAS ELECTRIC EMCH R32 Serie Manual De Instrucciones página 86

5.4 Adjusting the operation mode
Go to " " > "OPERATION MODE'', then press "
will appear:
OPERATION MODE
Operation mode setting：
There are three operation modes on the controller interface: HEAT
mode, COOL mode and AUTO mode, Use ''◄''， ''►'' to select the
mode and press "
HEAT mode=space heating mode, COOL mode=space cooling
mode. The mode selected will still be valid when exiting the
interface by pressing "
About AUTO mode:
The unit will select the operation mode automatically
based on the outdoor temperature and some settings in
"FOR SERVICEMAN". It is not recommended for non-
professionals to enter "FOR SERVICEMAN".
HEAT
COOL
CONFIRM
".
" from the page above.
INFORMATION
i
", the following page
AUTO
A
19
V.1