EAS ELECTRIC ECRL120P Manual De Instrucciones página 53

9. OPERATION
Up-Down airflow direction and swing (on some models)
SWING SWING
Use button to adjust the Up-down airflow direction.
1.Press the button every time, the louver swings 6 degrees.
2.Press and hold the button for 2 seconds,it turns into up-down swing
mode, press it again to stop.
When the Up-Down swing function is activated, the
(Not applicable to all the models)
The operation can refer to the following instructions for the unit with four
Up-Down louvers can be operated individually.
1.Press the button to activate the Up-Down
adjusting louver function. The
(Not applicable to all the models)
2. Pressing the button "+" or"-" can select the movement
of four louvers.Each time you push the button, the wire
controller select in a sequence that goes from: (the icon
means the four louvers move at the same time.)
- 0
-0 -1
3. And then use
selected louver.
mark will flash.
-2 -3 -4
button to adjust the Up-Down airflow direction of the
54
mark appears.
SWING SWING
V.2