Publicidad
Idiomas disponibles
Idiomas disponibles
- If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualified persons in order to avoid a hazard.
- CAUTION: In order to avoid a hazard due to inadvertent resetting of the
thermal cutout, this appliance must not be supplied through an external
switching device, such as a timer, or connected to a circuit that is regularly
switched on and off by the utility.
- WARNING: In order to avoid overheating, do not cover the heater.
- The heater must not be located immediately below a socket-outlet.
- The heater must be installed at least 1.8 m above the floor
.
- Means for disconnection having a contact separation in all poles must be
incorporated in the fixed wiring in accordance with the wiring rules.
Fixed heaters are to be installed so that switches and other controls cannot be
touched by a person in the bath or shower.
Warning: this product can be installed in bathrooms but only out of the
volumes according the national wiring rules (For France NF C 15-100)
Note: The above drawing is for reference only.
We suggest that you to contact a professional electrician for assistance.
Publicidad
