Infiniton HCW-5207 Manual De Usuario página 22

9) .Press" /
10) Repeat steps 2-7 above, you can set the whole weekly program (& Each day, the work of
each segment opens, the time of shutdown).
9) After above setting, press "
" " to choose the turn-on time of the day, then Press "
temperature (temperature range 10-49℃), press "
9). To cancel the weekly function, press the "
program is off. The product will revert to the previous function working status.
Note:
-After the above setting are completed and P program is working,press"
setting time of each day and time periods,
- The turn-on time periods 00~24hours, cannot set to minutes ;
-The"TIME/OFF"can not be less than"TIME/ON";
-When the"TIME/ON" is the same as"TIME/OFF", the time period enter into standby
mode;
Note: If main switch off ,power cut off, or plug out, it need reset . You can press
you set Time /Day.
Set open-window detection(ONLY by remote control)：
1). Press" "，the product enter into working status. Heating for a moment untill stable.
2). Press" " by remote control,light "
display"23"by default.Press"
detection mode, once the ambient temperature drops 5-10℃ within 10 minutes, then the
product will stop working within 30 minutes and enter into stand by mode. Then press
" "to turn on the product.
"to setting the target temperature(Temperature range 10-49℃),
" choose the unit turn-on day of the week, then press
/ "to set target temperature. During open-window
/ " to set desired
" to confirm the setting.
" agian , the light "P" will go off. The weekly
/ ℃ " will on; The temperature
"to check the
to check