Flexibridge Standard Mode - AEG IKE95771FB Manual De Instrucciones

To set the heat setting use the
two control bars on the left side.
Switching between the modes
To switch between the modes press
heat setting levels will be kept.
In some models there are two
flexible cooking areas, left and
right. To operate the flexible
cooking area on the right side,
use the symbols and the control
bars on the right side of the hob.
Diameter and position of the cookware
Choose the mode applicable to the size and
the shape of the cookware. The cookware
should cover the selected area as much as
possible.
Place the cookware with the bottom diameter
smaller than 160 mm centrally on a single
section. You can use a roaster pan for the
Big Bridge and the Max Bridge modes.
Place the cookware with the bottom diameter
larger than 160 mm centrally between two
sections.
. The
100-160mm

FlexiBridge Standard mode

This mode is activated by default when you
activate the function. It connects the sections
into two separate cooking areas. You can set
the heat setting for each area separately.
Use the two control bars on the left side.
Correct cookware position:
Incorrect cookware position:
> 160 mm
ENGLISH 67