Infiniton SPLIT-3630ES Manual De Usuario página 27

INSTALACIÓN DE LA UNIDAD EXTERIOR
Step4: Install Wiring
4.1 Use a phillips screwdriver to unscrew wiring cover, grasp and press it down gently to take it down.
4.2 Unscrew the cable clamp and take it down.
4.3 According to the wiring diagram pasted inside the wiring cover, connect the connecting
wires to the corresponding terminals, and ensure all connections are firmly and securely.
4.4 Reinstall the cable clamp and wiring cover.
Note: When connecting the wires of indoor and outdoor units, the power should be cut off.
Terminal block
Cable clamp
Wiring cover
Wiring diagram
21