Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATION
When you first use the appliance, there might be some slight smell which is normal. Allow the appliance to
work for one hour to make it disappear.
Before you plug in, keep the appliance at "OFF" position. After you plug in, press ON/OFF button to "ON"
position and the screen will light up and enter time setting interface.
1. Setting the time and turning on the device
To be able to use the preset programs (P1 / P2 / P3 / Personalized programs), the date and time must have
been set on the device.
For more details on the content of the preset programs (P1 / P2 / P3) refer to the following point.
Two different methods to set the time:
1. If the appliance was not connected to the power supply, after connection the time will appear on the
screen for setting. Press
button to set the hours / minutes / day of the week. Press the
Otherwise after 10 seconds without action the device will automatically return to stand-by mode as if
it was the first time you use the device.
2.
If the appliance is in operation and you want to change the time setting, press the
the same time to enter the time setting. Press
week (1-7). Press the
other than
saved automatically,
2. Press M
Press M button to toggle among the modes: Comfort mode
3 pre-set programs (P1 / P2 / P3), and Pilot wire mode P.
to toggle between hours / minutes / day of the week (1-7). Press the
button to set the hours / minutes / day of the week. Press any button
or
to save the setting, otherwise after 10 seconds without the setting will be
on control panel only
to toggle between hours / minutes / day of the
,
Economy mode
31
button to complete the setting .
and
,
Anti-freeze mode
at
, the
Publicidad
