Care And Cleaning - Infiniton HD-ET09 Manual De Instrucciones

Problem
The appliance does not heat
The device heats permanently

CARE AND CLEANING

1. Before cleaning the appliance, switch off the
appliance from the power supply and wait until it is
completely cold.
2. Use a damp cloth to clean the casing of the
device.
3. Clean grill and air outlet regularly. Never immerse
the appliance in water or allow water to enter the
appliance.
RECYCLING (DISPOSAL OF THE PRODUCT AT THE END OF ITS LIFE)
The crossed-out wheeled bin symbol indicates that the item should be disposed of
separately from household waste. The item should be handed in for recycling
in accordance with local environmental regulations for waste disposal. By
separating a marked item from household waste, you will help reduce the volume of
waste sent to incinerators or landfill and minimize any potential negative impact on
human health and the environment.
This product contains one button cell battery
Solution
Ensure that the circuit breakers are switched on the
installation, or the shedder did not cut the power
supply (if the installation has one).
Select the COMFORT mode.
Increase the temperature setting.
Under standby mode or in operation, press
button on the appliance for three seconds , when
LCD screen flash, then simultaneously press "M"
and " " button for 2 seconds on remote control
to pair the remote control and the apparatus. You
will hear a "Bee" sound when pairing is successful.
Now you can start the operation.
Ensure that the device is not in a draft.
Reduce the temperature setting.
40