Infiniton HD-ET09 Manual De Instrucciones página 35

Remarks:
1. The keyboard lock function does not lock the standby
2. The keyboard lock function will automatically be deactivated under the below circumstances.
1) the appliance is put into standby mode by pressing standby
2) the appliance suffers power disconnection.
If you want this option to be activated again you will need to press the M button for 3 seconds.
6. Window detector function
Press button to enter window detector function. The appliance will enter comfort mode as default. If
temperature decrease detected, the appliance will automatically enter anti-freeze mode. If temperature rise up,
the appliance will go back to comfort mode.
You can press M or PRG button to choose other modes, or press standby button to enter standby mode.
7. In case of power failure
All of the above settings for temperature, time, date of the week, and programs remain valid until the power
is removed.
After a power failure, when power is restored, the device will go back to the mode and
temperature selected before the power failure.
In the event of a power failure, the device only saves the following parameters: temperature and
operating mode. When the power is restored, the date and time must be set in order to make the various
programs work correctly.
TECHNICAL SPECIFICATIONS
Model
HD-ET09
230 V ~
Voltage
50 Hz
Frequency
900 W
Rated power
I
Protection
class
Keyboard lock
button.
HD-ET12 HD-ET15
230 V ~ 230 V ~
50 Hz 50 Hz
1200 W 1500 W
I I
34
button.
HD-ET20
230 V ~
50 Hz
2000 W
I