Descargar Imprimir esta página

Package Contents; Parts And Controls; To Use - Beurer SI 30 Manual De Instrucciones

Publicidad

Idiomas disponibles

Idiomas disponibles

• The use of accessories other than those specified
or provided by the manufacturer of this device can
lead to an increase in electromagnetic emissions
or a decrease in the device's electromagnetic
immunity; this can result in faulty operation.
• Failure to comply with the above can impair the
performance of the device.
2� Package Contents
1 x Steam Inhaler SI 30
1 x Mask
1 x Measuring Cup
1 x Instruction manual
3� Parts and Controls
1
2
3
4
1 Inhaler Mask
2 Flow Lever
3 On/Off Switch
4 Indicator Light
5
8
6
7
5 Vent Assembly
6 Water Reservoir
7 Base
8 Measuring Cup
4� To Use
1. Fully extend the power cord. Failure to do so
could cause overheating and possible fire
hazard. Do not use with an extension cord.
Place Inhaler on a flat, stable, water-resistant
surface for use.
2. Remove the Inhaler
Mask.
3. Press the buckle and
lift the Vent Assembly
straight up to separate
it from the Base.
4. Fill the Water Reservoir
with clean, clear water
up to the MAX mark
(1.35 fl oz /40 ml). Do
not overfill. Use with
water only. Do not
add any medication or
inhalant liquids to the
Water Reservoir.
4

Publicidad

loading