Turning The Appliance Off; Menu Settings U; Rinsing; Descaling - DeLonghi ELETTA EXPLORE ECAM45.5Y Serie Instrucciones De Uso

2. When at temperature, the appliance performs a rinse cycle
delivering hot water from the coffee spouts(A7); as well as
heating the boiler, this also heats the internal circuits by
circulating hot water.

6. TURNING THE APPLIANCE OFF

Whenever the coffee machine is turned off after being used to
make coffee, it performs an automatic rinse cycle.
1. To turn the appliance off, press the
9).
2. If envisaged, the appliance rinses the coffee spouts (A7)
with hot water, then goes off (stand-by).
Please note:
If you will not be using the appliance for some time, turn off,
then unplug from the mains socket.
Important!
Never unplug while the appliance is on.

7. MENU SETTINGS U

7.1

Rinsing

Use this function to deliver hot water from the coffee spouts
(A7) (and, if inserted, the hot water spout (D6)), to clean and
heat the appliance's internal circuit.
Place a container with a minimum capacity of 3.38 fl oz/100 ml
under the spouts (fig. 6).
To enable the function, proceed as follows:
1. Press the settings menu (C3);
2. Display "Rinsing";
3. Press "OK" to start delivery. After a few seconds, hot water
is delivered to clean and heat the appliance's internal cir-
cuit (fig. 7- 8);
4. To stop rinsing, press "Stop" or wait for rinsing to stop
automatically.
Please note:
• If the appliance is not used for more than 3-4 days, when
you turn it on again, we strongly recommend performing
2-3 rinses before use;
• After cleaning, it is normal for the grounds container (A10)
to contain water.

7.2 Descaling

For instructions on descaling, see section "17. Descaling".

7.3 Connectivity (certain models only)

Use this function to enable or disable connectivity. Proceed as
follows:
1. Press the settings menu (C3);
2. Scroll through the pages until "Connectivity" is displayed;
3. Press "Next";
4. Enable the Wi-Fi connection and remote control (via the
9
5. The appliance PIN, needed to connect to the App, is dis-
6. Press "<" to enter the settings menu;
7. Press "X" to save the new selection and go back to the
On the homepage, thesymbol (C4) indicating the connection
status alternates with the other symbols (e.g. descaling, etc.)
button (A9) (fig.
Please note:
•
•
1. Proceed as described above from point 1 to point 3;
2. Press "Reset";
3. Press "OK" to confirm cancellation of the network settings;
4. Connect with the App again and select the new credentials.

7.4 Adjust grinder

The appliance proposes a tutorial on how to adjust grinding cor-
rectly for best results:
1. Press the settings menu (C3);
2. Scroll through the pages until "Adjust grinder" is displayed;
3. Press "Read more" to consult the tutorial on how to adjust
9
De'Longhi Coffee Link App);
played on the screen;
homepage (C).
Symbol on homepage
--
If the remote connection is off, a number of the App's func-
tions will not be available (e.g. beverage preparation).
If you change the name or password of the Wi-Fi network,
or if you connect to a new Wi-Fi network, you will need to
perform the reset procedure as described below:
the grinding coarseness.
Meaning
Connectivity enabled: the
machine is waiting for the
first connection
The appliance is connected
The appliance is connected
to the home Wi-Fi, but there
is no network, or the cloud
cannot be reached
Connection disabled. To ena-
ble, enter the settings menu
(C3)