Door Reversal - Infiniton FG-BB158 Manual De Usuario

Door Reversal

To reverse the door you will need to tilt the appliance backward to access the
lower hinge which holds screws. Do not tilt the appliance more than 45 degrees
and do not lay the appliance flat on its side.
For your own safety, a minimum of 2 people should lift or tilt this product.
Tools Required: Torx headed screwdriver, flat headed screwdriver and hexagonal
spanner or a socket driver.
1. Unscrew the 2 screws from the upper hinge and remove the fridge door by
carefully lifting it up and away from the appliance.
2. Unscrew the 2 screws from the lower hinge and remove the hinge. Unscrew
the pin from the lower hinge and refit it from the opposite side.
Fix the lower hinge to the opposite side of the appliance with the pin facing
upward direction.
3. Remove all of the screw cap covers on the opposite side of the appliance from
where the hinges have just been removed. Remove the hinge plugs on the top and
bottom of the door and fix them to the opposite side.
4. Place the door back on to the lower hinge.
5. Use the top hinge and put the pin of the hinge into the top of the door and fix it
in to place. Ensure the door is aligned horizontally and vertically so that the seals
are closed on all sides before finally tightening the top hinge pin.
Remove the 2 door guide holders from side of the doors and fix them on to the
opposite side.
18