Reversing The Door Swing - Infiniton FGC-79WS Manual De Usuario

Reversing the Door Swing

⚫ How to disassemble the fridge/freezer door.
3. a．Screw offthe hinge cover screw, remove the
hinge cover, and insert the communication wire
into the hole on the cabinet top.
b． Remove the 4 screws ofthe upper hinge cover,
remove the hinge cover, and pry up the door
bushing and small end cap cover on the door.
c ． Insert the door
communication wire into the hole on the door,
and then put on the small end cap cover.
bushing and door
d．Screw off the 2 screws as shown below to
remove the hole cover on the cabinet top, get the
cabinet communication wire out of the hole; Pry
up the small end cap cover on the door, and get
out the door bush and door communication wire.
e． Insert the door bush into the round hole on
the door, and put on the small end cap cover.
f. Move the fridge door upward by over 50mm to
remove the door.
4. a．Screw off the 3 screws of the middle hinge
cover, and then remove the middle hinge.