Publicidad
Idiomas disponibles
Idiomas disponibles
Learning to use your telephone
9
2
2
10
3
4
5
1) Telephone directory label
2) One-touch memory keys
3) REDIAL key
4) MEM key
5) FLASH key
6) PAUSE key
7) MUTE key
8) Numeric keypad
9) Handset support
10) Handset wall mounting tab
Installation
Handset cord
Connect the long end of the handset cord in
the socket marked with the symbol
(position 11). Insert the cord in the cable
line (position 15) and attach the short end
to the handset.
Line cord
Connect the line cord in the socket marked
with the symbol
(position 12). Insert the
cord in the cable line (position 16), to up or
down direction, according to the telephone
position. Attach the other end to the
telephone
line
(RJ11
connector).
17
1
2
13
2
6
7
16
8
Dialing mode switch
Set this switch (position 14) according to
the desired dialing mode: PULSE (P) or
TONE (T1 for 100 ms flash time or T2 for
250 ms or 600 ms flash time, depending on
the telephone model). For more details,
please see Setting the dialing mode on
page 2.
Key Lock
In case of you have purchased the model
with the key lock feature (position 17), the
package will include two keys to be used
with the telephone. When locking your
telephone,
you
disable
functionalities; therefore you can avoid the
use of the telephone for undesired calls.
Wall-Mount installation
To install the telephone on wall, use the two
holes
localized
on
underside
telephone (position 13) to case the screws.
Make the holes on the wall with a 6 mm drill
bit, using the template (marks
on page 12 of this manual as a reference
(bushings and screws are not included).
Besides, use a screwdriver to snap out the
handset clip (position 18), as show in detail
1
modular
jack
18
11
15
12
14
all
the
keys
of
the
) provided
Publicidad
