Publicidad
Idiomas disponibles
Idiomas disponibles
A and insert it into the handset wall
mounting tab (position 10), according to
detail B.
Detail A
Detail B
Recommendations for Installation
Please, observe the following guidelines:
• For your own safety and protection, do
not uses the telephone in places with
overheat
or
extreme
humidity.
telephone
operates
at
temperatures
between +5ºC and +55ºC and it is not
water-proof.
• Varnished or lacquered furniture may be
marked by some parts of the telephone
such as the rubber feet.
• Place the telephone at least one meter
away from devices such as cordless
telephones or TV sets. These devices
may cause interference in the telephone.
• To clean the telephone, just use a damp
or antistatic cloth. Never use a dry cloth
(danger of electrostatic discharge) or any
abrasive cleaning products.
• When the telephone reaches its end of
service life, dispose of it in a way that
does not cause any harm to the
environment, in accordance with the local
legal requirements.
Setting the dialing mode (tone/pulse)
Your telephone must be programmed for
TONE dialing or PULSE dialing, according
to the telephone line it is connected to. The
default factory setting is the TONE dialing
mode with the T2 flash time option.
Checking the dialing mode:
Press any numeric key. If you can still hear
a dialing tone, change to the other dialing
mode.
Switching the dialing mode:
The switch located on the bottom of the
telephone allows you to do three settings:
P
PULSE
T1 TONE flash 100 ms
T2 TONE flash 250 ms or 600 ms
(
)
*
depends on the model of your telephone
Temporary changeover of dialing mode:
While the telephone is set to PULSE dialing
it may be necessary to temporarily change
the dialing mode to TONE dialing.
The
• Example: You wish to check your
banking balance using the telebank
service. Make the call as you usually
would and, as soon as the call is
complete, press
; at this moment your
telephone dialing mode will change to
TONE dialing. When you finished the
2
(
)
*
Publicidad
