Humidifying box operation
1. The hook is fixed on the box(Fig.1).
2. Open the box cover(Fig.2).
3. Pour on water in box, added to the highest level(Fig3.)
4. Put the box is fixed on the heater.
5. Water level cannot under minimum line(Fig.4).
Fig.1
Overheat safety device
●Your heater is fitted with a safety device to switches off the heater in the event of
overheating. If the safety device operated, please turn the heater off, unplug the
appliance and let it completely cool, inspect for blockage of air inlet or outlet,
attempting to restart the heater then after.
●If the heater fails to operate or the safety device switches the heater off again,
return heater to your nearest service center for examination or repair.
Maintenance:
1. Always disconnect the appliance and let it completely cool before any
maintenance.
2. Use a vacuum cleaner to remove dust on grilles.
3. Clean the outside of the unit with a damp cloth and then dry it with a dry cloth.
Never immerse the unit in water, nor let water drip into the unit.
Storing:
1. Always disconnect the appliance, let it completely cool and clean it before
storing.
2. If you do not use the device for a long period, put back the unit and the
instruction manual to the original carton and store in a dry and ventilated place.
3. Do not place any heavy items on top of carton during storing as this may damage
the appliance.
Recycling (Disposal of the product at the end of its life)
Waste Electrical Products Should Not Be Disposed Of With Household
Waste. Please Recycle Where Facilities Exist. Check With Your Local
Authority For Recycling Advice.
Fig.2
3
Fig.3
Fig.4