Vetus CANNME7 Manual De Instalación Y Usuario página 28

ENGLISH
8 Connectivity
@ Quick Access > > Connectivity
The CANNM7 has a built-in Wi-Fi module. This is used for updates,
map downloads and updates.
8 1 Wi-Fi access
@ Quick Access > > Connectivity > Wi-Fi networks
Switch on the Wi-Fi and select the desired Wi-Fi network. The CAN-
NME7 is now connected.
8 1 1 Wi-Fi configuration
@ Quick Access > > Connectivity > Wi-Fi configuration
Configure the automatic connection function here if required. If Au-
tomatic connection has been switched on, the device will connect
automatically with a known Wi-Fi access point.
8 2 Software update
@ Quick Access > > Connectivity > Software update
The CANNME7 can only be updated via Wi-Fi.
Press Device update to start the update procedure. Confirm the ex-
ecution of the procedure and follow the instructions on the screen to
complete the process.
9 Personalising the system
@ Quick Accesss > Edit FloatBox
This manual is limited to explaining the float box function. A float box
is a (personalised) information box that can be added to a CANNME7
screen.
9 1 Creating a new float box
Select the screen to which a float box must be added, deleted or ed-
ited.
Open the FloatBox shortcut. The previously selected screen will be
opened and the + and x symbols displayed at the top of the screen.
28
371001.01
Press x to close the editing mode. Press + to create a new float box. In
editing mode, a new float box and a fold-out menu will be displayed.
The fold-out menu has the following options:
Add a new numerical parameter
Move the float box across the screen
A
Reduce the font size
A
Increase the font size
B
Change the letter colour to black or white
Switch between a filled or transparent background
Delete the selected float box parameter set
Close the editing of the selected float box
The newly created float box contains a single numerical value. Press
the value to change it. A new dialogue window, with all the options,
will be displayed.
Add another numerical value by pressing the + and select the desired
parameter. The full list of parameters is shown in section 11.
Use the options from the fold-out menu to further personalise the
float box.
9 1 1 Editing the float box
Press the float box shortcut. Now press the float box to be edited un-
til the fold-out menu is displayed.
Use the options from the fold-out menu to further personalise the
float box. Press x to close.
9 1 2 Moving the float box
Press the float box shortcut. Now press the float box to be edited un-
til the fold-out menu is displayed.
Press , and hold and drag the float box to the desired location
on the screen. Press x to close.
9 1 3 Deleting the float box parameter
Press the float box shortcut. Now press the float box to be edited un-
til the fold-out menu is displayed.
Press and hold the float box parameter to be deleted and drag the
contents to the left. The text "remove" will appear. Press to delete
the parameter or drag the contents back to the right to stop editing.
Press x to close.
9 1 4 Deleting the float box
Press the float box shortcut. Now press the float box to be edited un-
til the fold-out menu is displayed.
Press the rubbish bin symbol to delete the float box.
Installation and user manual CANNME7 Multifunctional, multi touch display