Publicidad
MANUALLY STORE STATION:
BASIC OPERATIONS / OPERACIONES BÁSICAS
1. Press T/SRC button the rotate VOL knob to
Receiving a desired station. Press PRESETS
select CAMERA source. In this way, the speaker
button into the presets, rotate VOL knob to
will no sound.
select a preset, then press and hold PRESETS
PTY OPERATION
2. The "Camera trigger" wire connected to 12V
button to save to this preset.
In PTY item. Rotate VOL knob to select the
(Reverse Lamp) power. It will switch to CAMERA
PTY kinds. When shown the VOL kind you
source. In this way speaker keeps previous
RECALL PRESET STATION:
want. Press VOL knob to search.
source sound.
Press PRESETS button into the presets, rotate
3. Press CAM button to switch CAMERA source.
VOL knob to select the desired preset, then
Press it again back to previous source. In this
press VOL knob.
Press SRC button then rotate VOL knob to
way speaker keeps previous source sound.
REPEAT/RANDOM/FILE LIST FUNCTION:
select WB source.
RDS OPERATION
In USB playing, press PRESETS button into the
Press and hold PRESETS button to show the
menu:
Select station:
RESET FUNCTION
RDS menu. Rotate VOL knob to set them.
Press PRESETS button into the presets,
Note: In USA area, The AF no function (can not
In the setting menu, select RESET item and
FILE LIST / REPEAT ONE / REPEAT ALL /
rotate VOL knob to select the desired preset,
press YES to restore all the data back to the
be set to on). AF is enable in EUROPE area.
RANDOM ON. Rotate VOL knob to select them.
then press VOL knob. Also press e / f
factory setting.
button you can select next / previous station.
Noted: When you reset the unit, All the
In AF item (press menu button) .You can setting
AUX OPERATION
memories will be lost!
the AF to on/off.
USB OPERATION
AF on: Symbol "AF" appears on the display.
Connecting the signal to the AUX IN connector.
RADIO OPERATION
Program name is displayed on receiving a RDS
Press SRC button then rotate VOL knob to
When an USB driver is inserted to the unit, the
station. "AF" symbol starts blinking if the
select AUX source.
unit
will
play
Press T/SRC button then rotate VOL knob to
broadcasting signal getting worse. It will start
automatically. If an USB drive is already
select FM/AM source. Shortly press e / f
to search the stronger station which in AF list
BT OPERATION
inserted in the unit. Press SRC button then
button to receive the desired radio station.
and switch to the good station. If it doesn't find
rotate VOL knob to select USB source.
Press and hold e / f button for manual
a stronger station in AF list. It will active the PI
PAIRING
tuning the frequency.
SEEK mode to search station which as same PI.
On mobile phone, select the BT item searching
SELECT FILE & FAST FORWARD/
AF off: switch off the AF mode.
the BT device. "DS18-MRX100" should appear
FAST REVERSE
AUTO STORE:
Traffic Announcement (TA)
in the list, select "DS18-MRX100" and then
Press e / f button to skip to next/previous
Press
button for 2 seconds to auto store
TA on: When received a TA station it will switch
ab
input password "0000" If it needs a password.
file. Hold e / f button to fast forward or
temporarily to radio mode to listen to the TA
stations to the presets.
When successful paired, the BT mark will be
fast reverse.
station whatever in RADIO/USB/AUX/BT
shown on the display.
mode. If the volume level was under the TA
PLAY/PAUSE
volume it will be raised to the TA volume
BT AUDIO
Press
button to pause/playing the file.
automatically.
ab
Press SRC button to switch to BT source. It will
TA off: Turn off the TA function.
play
a
song
of
automatically. Press ab key to pause/play
the song. Press e/f button to select
next/previous song.
DISCONNECT / RE-CONNECT THE BT
When the mobile phone paired with the unit. If
you want to disconnect the BT. In BT source,
press and hold PRESETS button for 2 seconds
to disconnect/re-connect the BT.
the
MP3/WMA
your
mobile
phone
OPERACIÓN PTY
En la opción PTY. Gire la perilla VOL para seleccionar los
tipos de PTY. Cuando se muestra el tipo de VOL que
desea. Presione la perilla VOL para buscar.
FUNCIONAMIENTO WB (BANDA METEOROLÓGICA)
Presione el botón SRC y luego gire la perilla VOL para
seleccionar la fuente WB.
Seleccionar estación:
Presione el botón PRESETS, en los preajustes, gire la
perilla VOL para seleccionar el preajuste deseado, luego
presione VOL. También presione el botón
seleccionar la estación siguiente / anterior.
FUNCIONAMIENTO USB
Cuando se inserta un controlador USB en la unidad,
la unidad reproducirá el archivo MP3/WMA automá-
file
ticamente. Si ya hay una unidad USB insertada en la
unidad. Presione el botón SRC y luego gire la perilla VOL
para seleccionar la fuente USB.
SELECCIONAR ARCHIVO Y AVANCE RÁPIDO /
RETROCESO RÁPIDO
Presione el botón
siguiente
e / f
botón / para avanzar o retroceder rápidamente.
REPRODUCIR PAUSAR
Presione el botón ab para pausar / reproducir el
archivo.
e / f
para saltar al archivo
e / f
anterior. Mantenga presionado el
para
14
Publicidad
