Descargar Imprimir esta página

Important Safeguards - Cooper Lighting Metalux CBRK Instrucciones De Instalación

Relé de transferencia de emergencia con control de atenuación

Publicidad

Idiomas disponibles

Idiomas disponibles

Installation Instructions – Metalux CBRK Emergency Transfer Relay with dimming control
When using electrical equipment, basic safety precautions should always be followed, including the following:
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
1.
CAUTION – This fixture provides more than one power supply output source. To reduce the risk of electrical shock,
disconnect both normal and emergency sources by turning off the AC branch circuit.
2.
CAUTION – To reduce risk of electrical shock, this unit requires the case to be grounded before AC power is applied.
3.
CAUTION – This is a sealed unit. Replace the entire unit when necessary.
4.
DO NOT USE OUTDOORS. The ETS-DR is for use with grounded, UL Listed, indoor fixtures. Not for use in heated air
outlets or hazardous locations.
5.
Do not mount near gas or electric heaters.
6.
The ETS-DR should be mounted in locations and at heights where it will not readily be subjected to tampering by
unauthorized personnel.
7.
The ETS-DR is compatible with all AC magnetic and electronic ballasts and drivers.
8.
The ETS-DR is for use in 0-10 volt dimming applications, and not designed for use with 3-wire dimming or step dimming
ballasts. The maximum current of the dimming circuit must not exceed 100 mA.
9.
For use in -20°C minimum, 65°C maximum ambient temperatures.
10. The use of accessory equipment not recommended by the manufacturer may cause an unsafe condition.
11. Do not use this equipment for other than intended use.
12. Install in accordance with the National Electrical Code and local regulations.
13. Installation and servicing should be performed by qualified personnel.
14. Lighting fixture manufacturers, electricians, and
end-users need to ensure product system compatibility before final installation.Make sure all the connections are in
accordance with the National Electrical Code and any local regulations.
2
COOPER LIGHTING SOLUTIONS

Important Safeguards

IB51921022
Installation instructions

Publicidad

loading