Publicidad
Idiomas disponibles
Idiomas disponibles
ENGlIsh
MAINTENANCE
WARNING: To reduce the risk of serious personal
injury, turn unit off and disconnect it from
power source before making any adjustments or
removing/installing attachments or accessories.
An accidental start-up can cause injury.
Your BLACK+DECKER power tool has been designed to
operate over a long period of time with a minimum of
maintenance. Continuous satisfactory operation depends
upon proper tool care and regular cleaning.
Cleaning
WARNING: Blow dirt and dust out of all air vents with
clean, dry air at least once a week. To minimize the
risk of eye injury, always wear approved eye protection
when performing this procedure.
WARNING: Never use solvents or other harsh
chemicals for cleaning the non-metallic parts of the
tool. These chemicals may weaken the plastic materials
used in these parts. Use a cloth dampened only with
water and mild soap. Never let any liquid get inside the
tool; never immerse any part of the tool into a liquid.
Nozzle Cleaning (Fig. A, G)
If the nozzle becomes clogged with foreign materials, such as
dirt, excessive pressure may develop. If the nozzle becomes
partially clogged or restricted, the pump pressure will pulsate.
Clean the nozzle immediately using the nozzle cleaner.
1. Turn OFF and unplug the pressure washer unit
2. Turn OFF the water supply.
3. Pull trigger
7
on spray handle
water pressure.
4. Remove the nozzle from the spray wand
depressing the button
5. Using the nozzle cleaning tool
from the nozzle.
6. Run water from a faucet or garden hose through
the nozzle.
Filter Cleaning (Fig. A, L)
Inspect the filter
21
before each use and clean if necessary.
Remove the filter element and run under clear water to
remove any debris.
Storage (Fig. H, I)
•
Store in a dry, covered location above freezing
temperature. sToRE INDooRs.
•
Always completely empty water from high pressure hose,
pressure washer unit, nozzles, and spray wand.
•
Nozzles can be stored in the nozzle storage
the bracket
as shown in Fig. I.
27
•
Power cord can be stored coiled up around the pressure
washer unit and secured with the cord retaining
hooks
17
as shown in Fig. H.
•
High pressure hose
1
secured to the handle using the supplied hook and latch
strap
as shown in Fig. I.
28
•
The spray handle
4
can be stored onto the rear of the
unit using the bracket
28
8
4
to relieve any
by
2
3
.
14
, unclog any debris
29
can be stored coiled up and
27
as shown in Fig. I.
•
The spray wand
shown in Fig. I.
Accessories
WARNING: Since accessories, other than those
offered by BLACK+DECKER, have not been tested with
this product, use of such accessories with this tool
could be hazardous. To reduce the risk of injury, only
BLACK+DECKER recommended accessories should be
used with this product.
Recommended accessories for use with your tool are
available at extra cost from your local dealer or authorized
service center.
Repairs
WARNING: To assure product SAFETY and RELIABILITY,
repairs, maintenance and adjustment (including brush
inspection and replacement) should be performed
by a BLACK+DECKER factory service center or a
BLACK+DECKER authorized service center. Always use
identical replacement parts
If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons
in order to avoid a hazard.
PROTECTING THE ENVIRONMENT
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your BLACK+DECKER
.
product needs replacement, or if it is of no further use
to you, do not dispose of it with household waste. Make
this product available for separate collection.
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand for
raw materials. Local regulations may provide for
separate collection of electrical products from the
household, at municipal waste sites or by the retailer
when you purchase a new product.
section of
2
can be stored into the handle as
Publicidad
