Technical Data; Noise Information; Vibration Information; Intended Use - Worx WX709 Manual Original

13. GUARD CLAMPING LEVER
* Not all the accessories illustrated or described
are included in standard delivery.

3. TECHNICAL DATA

Type WX709 WX709.X (700-749 -designation of
machinery, representative of Angle Grinder)
Voltage
Power input
No load speed
Disc Size
Disc bore
Spindle thread
Diameter of grinding wheels
Max. Thickness of grinding
wheels
Protection class
Machine weight
* X=1-999, A-Z, M1-M9 there are only used for different
customers, there are no safe relevant changes
between these models.
We recommend that you purchase your accessories
from the same store that sold you the tool. Refer to
the accessory packaging for further details. Store
personnel can assist you and offer advice.

NOISE INFORMATION

A weighted sound pressure
A weighted sound power
K &K
pA wA
Wear ear protection

VIBRATION INFORMATION

Vibration total values (triax vector sum) determined
according to EN 60745:
Angle Grinder
WX709 WX709.X *
230-240 V~50 Hz
2350 W
6500 /min
230 mm
22.2 mm
M14
230 mm
6 mm
/ll
5.7 kg
L : 96 dB(A)
pA
L : 107 dB(A)
wA
3.0dB(A)
Vibration emission value: a
Surface
grinding
Uncertainty K = 1.5m/s²
– the declared vibration total value has been measured
in accordance with a standard test method and may
be used for comparing one tool with another;
– the declared vibration total value may also be used in
a preliminary assessment of exposure.
WARNING: The vibration emission value during
actual use of the power tool can differ from the
declared value depending on the ways in which the
tool is used dependant on the following examples and
other variations on how the tool is used:
How the tool is used and the materials being cut.
The tool being in good condition and well maintained
The use the correct accessory for the tool and
ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any anti
vibration accessories are used.
And the tool is being used as intended by its design
and these instructions.
This tool may cause hand-arm vibration
syndrome if its use is not adequately managed.
WARNING! To be accurate, an estimation of
exposure level in the actual conditions of use
should also take account of all parts of the operating
cycle such as the times when the tool is switched off
and when it is running idle but not actually doing the
job. This may significantly reduce the exposure level
over the total working period.
Help to minimize your vibration exposure risk.
Maintain this tool in accordance with these
instructions and keep well lubricated (where
appropriate)
If the tool is to be used regularly then invest in anti
vibration accessories.
Plan your work schedule to spread any high vibration
tool use across a number of days.

4. INTENDED USE

The machine is intended for cutting, roughing
metal and stone materials without using water. For
cutting metal, a special protection guard for cutting
(accessory) must be used.
= 8.4 m/s
2
h.AG
11
EN