GoPro Volta Guia Del Usuario página 3

Mounting Your GoPro
INSTALLING THE USB PASS-THROUGH DOOR
Replace your camera's standard door with the included USB Pass-Through Door.
1. Unlock the latch and flip the door open.
2. With the door in the horizontal position, gently pull outward until the door
snaps off.
3. Line the USB Pass-Through Door up with the small silver bar.
4. Press the door tightly into the small silver bar until it snaps into place and is
securely attached.
WARNING: Using the USB Pass-Through Door with the
Volta camera cable plugged in will protect Volta and your
camera from rain and snow, but is not waterproof. Using the
USB Pass-Through Door underwater with your GoPro will
damage your camera and void the warranty.
Mounting Your GoPro
ATTACHING YOUR CAMERA
1. Mount your GoPro to Volta using the top mounting fingers.
Heads Up: Be sure to insert your camera into the mounting fingers with the
USB Pass-Through Door on the side opposite the Thumb Screw. Rotate the
mounting fingers if needed to ensure that your camera is mounted properly.
2. Plug Volta's USB cable into your camera.
3. Press the Battery Status button to start sending power to your camera.