Descargar Imprimir esta página

GoPro Volta Guia Del Usuario página 4

Publicidad

Idiomas disponibles

Idiomas disponibles

Using Volta to Control Your GoPro
Volta can be used to control your GoPro whether its mounted or detached from
the grip. Be sure set up wireless control now so you can simply detach your
GoPro anytime you see a great shot that needs a wireless setup.
WIRED CONTROL
Volta's integrated camera buttons gives you easy one-hand control of your GoPro.
1. Press the Battery Status button
2. Press Volta's Mode + Power button
3. Press Volta's Mode + Power button
mode that you want.
4. Press Volta's Shutter button
5. To stop capturing video or time lapse, press Volta's Shutter button
6. Press and hold Volta's Mode + Power button
GoPro off.
WIRELESS CONTROL
Use Bluetooth to turn Volta into a wireless remote. Wireless control is also used
to control your GoPro if you're using Volta with Media Mod. Detach your GoPro
from Volta and follow these setup instructions:
1. On your camera, complete these steps:
a. From the rear screen, swipe down to access the Dashboard.
b. Swipe left, and then tap Connections > Connect Device > Volta.
2. Press and hold the Bluetooth button
will automatically begin pairing. Volta's center LED will blink blue while it's
searching for the camera and turn solid blue when it's connected.
After pairing, Volta and your camera will wirelessly connect automatically when
they are both on and not connected via the camera cable.
PRO TIP: After detaching your GoPro, plug Volta's USB cable into the charging
port to keep it out of the way.
WARNING: Volta is not weather resistant when used as a
wireless remote or any time the USB-C cable is disconnected
from your camera.
to wake Volta.
to turn your GoPro on.
button repeatedly to cycle to the
to start capturing.
button to turn your
on Volta for 4 seconds. Your camera
Tripod
Flip out the built-in tripod legs any time
you need to set Volta down to capture
stationary shots. You can swivel or tilt
your camera to adjust the capture angle.
PRO TIP: Volta's additional battery
power and tripod legs make it great for
capturing extra-long time lapse shots.
Mounting Volta
again.
RETRACTABLE MOUNTING FINGERS
Press the mounting finger release
button to use Volta's retractable
mounting fingers. They make it easy
to attach Volta to GoPro backpack
straps, and other mounts.
1/4-20 MOUNT
Volta has 1/4-20 mount built into its
base for added mounting flexibility.
LANYARD
Use the hole in Volta's base to secure
the included wrist lanyard.

Publicidad

loading