Call Waiting - Snom C300 Guia De Inicio Rapido

by ). When NFC is detected, the speakerphone plays a tone. LEDs 1–8 turn white for one
second.
3. If you are asked for a PIN code, enter 0000.
If NFC pairing does not work, try again or try connecting via Bluetooth pairing.
Using · Bedienung · Utilisation · Uso
Play audio
When the C300 is paired to a device, it acts as an external speaker and plays audio from the paired
device.
When the C300 is playing media from a paired Bluetooth device, the audio will be interrupted and
changed to PC audio immediately when you connect the C300 to a Windows PC with the USB cable.
Receive a call
When your mobile phone receives an incoming call the C300 rings and the circle LEDs 1–8 flash
green (if USB call) or blue (if Bluetooth call).
Answer an incoming call
Press . During the call, the respective circle LEDs turning white indicate the direction from
where the microphones are receiving sound.

Call waiting

If your paired mobile phone receives an incoming call while a call is in progress, the C300 beeps
twice, and the LEDs blink blue ON 0.25 s, OFF 0,25 s, ON 0.25 s, OFF 2 s until call waiting is stopped.
• Press to hold the current call and answer the waiting call.
Swap calls
With an active call and a call on hold, press
hold and connect to the held call.
Reject an incoming call
Press for at least two seconds.
for at least two seconds to put the current call on
9